Fig. 7
From: Shigaraki UAV-Radar Experiment (ShUREX): overview of the campaign with some preliminary results
The top left panel shows the temperature profiles and the top right panel, relative humidity profiles during the UAV 17 flight. The blue curve corresponds to descent D1, the red curve to ascent A2, and the black curve to descent D2. The initial ascent (A1) borne by the balloon has been omitted for clarity. Also for clarity, the profiles have been offset to the right by 5 °C for temperature and 50% for humidity. In the top left panel, the first profile refers to the iMET sensor data, with the DH profile offset to its right, which is followed by the CW profile to its right. In the top right panel, the relative humidity profile is from the iMET sensor followed to its right by that from the DH sensor. The bottom three panels show composite profiles of temperature (bottom left) and relative humidity (bottom right) from the three sets of sensors and the potential temperature derived from them (bottom middle). Once again, the blue curve corresponds to descent D1, the red curve to ascent A2, and the black curve to descent D2