Fig. 6From: Shigaraki UAV-Radar Experiment (ShUREX): overview of the campaign with some preliminary resultsThe altitude (top panel), temperature (middle panel), and relative humidity (bottom panel) as a function of time for UAV 17. In the temperature and humidity plots, the blue curve corresponds to the sensors on iMET, the red curve to the DH sensors, and the black curve to the cold wire (CW) sensor. There is general agreement between the various sensors, except for the fact that an offset of −0.8 °C had to be applied to the DH and CW temperature data and +15% to the DH humidity data. The altitude plot shows altitude derived from the DH (black) and iMET (blue) pressure sensorsBack to article page